Table of Contents
Advertisement
SHIFT
ENTER
SHIFT
ENTER
K2
K1
• Press
Temperature enab.
Humidity enab.
Temperature enab.
Humidity enab.
If you enter the wrong number, you will still have to press ENTER and then re-digit
the number
Dehumidification:
Vibrator:
Specimens:
U.V. lamp:
Water recharge:
Not used:
Not used:
SP. hum. CTRL
• To switch off (led light switched off)
TO VISUALIZE
•
The key led light is switched on the machine starts up and carries out the
controlled humidity slope.
•
Once the set temperature values have been reached, the machine will continue
along these values.
Temp. meas.
Humid. meas.
17
A5
-
To enable or disable tempera-
ture control
ON
OFF
-
To enable or disable humidity
control
-
Temperature control is enabled.
If you also wish to enable
humdity control, move the
cursor to the line below and use
ON
the same keys.
ON
A6
-
Ignore these data for the time
OFF
being and move on to the next
page
OFF
OFF
OFF
A7
OFF
OFF
OFF
To improve the performance of the sys-
OFF
tem (experiment the setting)
35 °C
Internal chamber data are visualized.
90 %
Hide quick links:
Advertisement
Table of Contents
