Table of Contents
Advertisement
• Enter the temperature gradient but
leave the humidity gradient at 0 for
the time being.
ENTER
SHIFT
ENTER
SHIFT
ENTER
• Press
Temp. gr.
Hum. gr.
If you enter the wrong number, you will still have to press ENTER and then re-digit
the number.
Temperature enab
Humidity enab.
Temperature enab.
Humidity enab.
If you enter the wrong number, you will still have to press ENTER and then re-digit
the number.
Dehumidification:
Vibrator:
Specimens:
U.V. lamp.:
Water recharge:
Not used:
Not used:
SP. hum. CTRL
K2
•
To switch off (led light switched off)
TO VISUALIZE ON THE DISPLAY
K1
•
The key led light is switched on
•
the machine starts up and carries out the set temperature slope with a 60% RH
humdity.
Once the set temperature values have been reached, the machine will continue
along these values.
Temp. meas.
Humid. meas.
A4
1.00 °C min
0.00 RH%min
A5
-
ON
OFF
-
-
ON
ON
A6
-
OFF
OFF
OFF
OFF
A7
OFF
OFF
Humdity slope control remains
OFF
switched off.
OFF
To improve the performance of the
system (experiment the setting)
35 °C
Internal chamber data are visualized.
60 %
15
To enable or disable temperature
control
To enable or disable humidity
control
Temperature control is enabled
If you also wish to enable humdity
control, move the cursor to the line
below.
Ignore these data for the time
being and move on to the next
page.
Hide quick links:
Advertisement
Table of Contents
