Table of Contents
Advertisement
Step 12 : Click "APC" to start APC calibration. ("factory" key : Return APC value each level of the handset.)
If a CMU200 is used, refer to Annex notex2-1 for Configuration.
If an HP8960 is used, refer to Annex notes2-2 for Configuration.
Step 13 : Click each button in turn for each power level. Referring to the table on the right of the screen, adjust the GSM Test
Set (Analyzer/Generator) to the required value. When the parameter is set, press "Next" to continue.
Operation Level 5 and Level 6 to examples
Note: Level 5 parameter value must be decreased.
Level 6 parameter value must be increased.
– 8-18 –
Advertisement
Table of Contents
