Table of Contents
Advertisement
Dummy Battery (Part No. PS2G66DUMBAT)
The Dummy Battery via power supply equipment to provide stable power for the phone. It is required for software
download.
Figure 7.1. : Dummy Battery
PCB Repair Jig (Part No. G66PCBAJIG)
The PCB Repair Jig provides the necessary connections between the PCB Assembly and external test equipment. It is
required for RF calibration.
Figure 7.2. : PCB Repair Jig
A cable with SMA female connector is provided to make the RF connection. An SMA to N-Type male adaptor will be required
to connect the Repair Jig to the service equipment. Cable losses for the RF connection are 0.5 dBm (GSM 900) and 0.7 dBm
(GSM 1800).
A replacement RF Probe for the Repair Jig is available as a spares item.
– 7-2 –
Advertisement
Table of Contents
