Table of Contents
Advertisement
RF Test Jig (Part No. PS2G66RFJIG)
The RF Test Jig provides the connections between the test equipment and the phone for unit testing.
It also provides power supply for the phone.
A replacement RF Probe for the Repair Jig is available as a spares item.
RF Cable (Part No.73PV104001W)
The RF cable provides the necessary connections between the PCB Repair Jig/RF Adapter and external test equipment.
A cable with SMA female connector is provided to make the RF connection. An SMA to N-Type male adaptor will be required to
connect the Jig to the service equipment. Cable losses for the RF connection are 0.5 dBM (GSM 900) and 0.7 dBM (GSM 1800).
Figure 7.3. : RF Test Jig
Figure 7.4. : RF Cable
Figure 7.5. : RF Cable
– 7-3 –
Advertisement
Table of Contents
