Table 3. Antenna cable guide
Cable color
White cable (Main)
Black cable (Aux)
2. Align the notch on the WWAN card with the tab on the WWAN card slot.
3. Slide the WWAN card at an angle into the WWAN card slot.
4. Align and place the WWAN card bracket on the WWAN card.
5. Install the screw (M2x3) to secure the WWAN card bracket on the WWAN card to the system board.
6. Close the mylar sheet to cover the WWAN card.
Next steps
1. Install the
base
cover.
2. Exit the
service mode
3. Install the
SIM card tray
4. Install the microSD-card.
5. Follow the procedure in
System fan
Removing the system fan
Prerequisites
1. Follow the procedure in
2. Remove the microSD-card.
3. Remove the
SIM card tray
4. Enter the
service
mode.
5. Remove the
base
cover.
About this task
The following image indicates the location of the system fan and provides a visual representation of the removal procedure.
40
Removing and installing components
for 4G LTE enabled systems.
after working inside your
before working inside your
for systems enabled with 4G LTE.
Connector
White triangle (△) on the WWAN module of the system
board
Solid triangle (▲) on the WWAN module of the system
board
computer.
computer.