Steps
1. Lift and disconnect the hard-disk drive cable from the connector on the system board.
2. Loosen the four (M2X4.5) screws that secure the hard-disk drive assembly to the palmrest assembly.
3. Lift and remove the hard-disk drive assembly from the slot on the palmrest assembly.
Removing the hard-disk drive bracket
Prerequisites
1. Follow the procedure in
2. Remove the microSD-card.
3. Remove the
SIM card tray
4. Enter the
service
mode.
5. Remove the
base
cover.
6. Remove the
hard-disk
About this task
The following image indicates the location of the hard-disk drive bracket and provides a visual representation of the removal
procedure.
32
Removing and installing components
before working inside your
for 4G LTE enabled systems.
drive.
computer.