Adding A Job To The Queue; Deleting A Job - Brady Wraptor A6200 User Manual

2. Tap one of the options to sort the list alphabetically, by date, by number of labels, or by label
supply.
To search for a label file in the list:
1. Tap the Search button.
2. Use the keyboard displayed on the touch screen to type all or part of a file name to search for.
The search is not case sensitive.
3. Tap the enter button.
4. The list of print jobs displays only files found in the search. To clear the search and display all
files again, click the clear button.

Adding a Job to the Queue

You must add jobs to the queue in order to run them, that is, to print labels and wrap them around a
wire or cable.
To add a job to the queue:
1. Find the job you wish to add to the queue and tap the check box for that print job.
2. Tap the Add button.
selected, then you need to enable the print queue. To do so, go to Settings > Print Queue >
Enable Print Queue. See "Print Queue" on page 35.)
The printer runs the print job and displays the Printing screen. See "Running Jobs" on page 33.
Tip: If you turn on Auto Queue Job in Settings > Print Queue, then you don't have to manually add
jobs to the queue.

Deleting a Job

Deleting a job removes the label file from the printer's memory or from the USB drive depending on
your File Location setting.
To delete a print job:
1. Find the job you wish to delete and tap the check box for that print job. You cannot delete jobs
that are in the print queue. Jobs that are in the print queue have this symbol rather than a
check box next to them.
To remove jobs from the print queue, see "Print Queue" on page 35.
2. Tap the Delete button.
Wraptor A6200 User Manual
(If the Add button is not visible when you have multiple jobs
General Operation
Printing: Details
31