Clover CDR-4170 Instruction Manual page 55

7. PRINT
•
Click the PRINT button to print the current pictures shown on the GUI and then the
following window pops up along with "WAIT...". Please wait a couple of seconds until the
system loads data to print.
8. REC
•
Click the REC button to start or stop recording. User can switch ON or OFF recording
from a remote location through the network when the DVR is in the recording mode.
•
When the system is in the recording mode, the button will turn red in color.
•
If not recording, the button turns green in color.
9. CHANNEL SELECTION BUTTONS
•
You can see a channel in full screen by clicking one of the channel selection buttons.
10. QUAD BUTTON
•
Click the Quad button to display the quadrant pictures.
11. AUTO BUTTON
•
The GUI will be viewed a full screen at a time in a continuous sequence (one camera
after another) by clicking this button.
•
The dwell time can be set from 1 to 10 seconds in the SETUP menu on the GUI.
•
The sequencing order: CH1->CH2->CH3->CH4->QUAD.
12. POP
•
It stands for Picture of Picture.
Click the POP button, and it will be displayed a medium screen and 3 small screens.
•
- 50 -