Table of Contents
Advertisement
CS Cabinet Range
Moving Cabinets to Installed Position
dŽ ĞŶƐƵƌĞ ĂŶLJ ƌŝƐŬ ŽĨ ĚĂŵĂŐĞ ƚŽ Đ ĂďŝŶĞƚƐ ǁ Śŝů Ğ ŵŽǀ ŝŶŐ ƚŽ ƚŚĞŝƌ ŝŶƐƚĂů ů ĞĚ ů ŽĐ ĂƟŽŶ ŝƐ ŵŝŶŝŵŝƐĞĚ͕ ŝƚ
ŝƐ ƐƚƌŽŶŐů LJ ƌĞĐ ŽŵŵĞŶĚĞĚ ƚŚĂƚ ƚŚĞ ĨŽů ů Žǁ ŝŶŐ ŝŶƐƚƌƵĐ ƟŽŶƐ ĂƌĞ ĨŽů ů Žǁ ĞĚ͘
Equipment Required:
ϭ dž & ŽƌŬ ŚŽŝƐƚ ǁ ŝƚŚ ŵŝŶŝŵƵŵ ϭϮϬϬŵŵ ů ŽŶŐ ƟŶĞƐ ;ĨŽƌŬƐͿ
2 x Dollies with 4 swivel wheels 900mm apart front to back, and minimum 400mm apart side to
side.
K ŶĐ Ğ Đ ĂďŝŶĞƚƐ ŚĂǀ Ğ ďĞĞŶ ŵŽǀ ĞĚ ŝŶƚŽ ƚŚĞ ƐƚŽƌĞ ǁ ŝƚŚ ƚŚĞ ƐŚŝƉƉŝŶŐ ƉĂů ů ĞƚƐ ƐƟů ů ĂƩ ĂĐ ŚĞĚ͕ ƚŚĞ
ĨŽů ů Žǁ ŝŶŐ ŵĞƚŚŽĚƐ ƐŚŽƵů Ě ďĞ ƵƐĞĚ ƚŽ ŵŽǀ Ğ Đ ĂďŝŶĞƚƐ ƚŽ ƚŚĞŝƌ Į ŶĂů ŝŶƐƚĂů ů ĞĚ ƉŽƐŝƟŽŶ͗
Method 1: For 2448mm and 3672mm long cabinets.
1. Carefully lift the cabinet off the pallet with a fork hoist, taking care to position the forks
in the centre of the cabinet and directly under the skid rails. **
2. Place two dollies under either end of the cabinet, just inside the end foot bolts. Gently
lower the cabinet on the dollies.
3. Ensure the floor where the cabinet is to be manoeuvred, is swept and free from debris,
as this could otherwise result in a dolly wheel coming to an abrupt stop and destabilise
the cabinet.
D ĞƚŚŽĚ Ϯ͗ & Žƌ ϭϮϮϰŵŵ W ů ĂƩ Ğƌ Đ ĂƐĞ͘
1. Keep the cabinet in its crate
2. Deliver the cabinet to just in front of its final position with the forklift
3. Remove crating
4. Gently lift the cabinet into its final position with the forklift
The long axis (900mm apart) wheels should locate as close to
directly under the Skid rails as possible to ensure stable support.
This is the preferred method for this case as it is top heavy and would
be very unstable on dollies. If any other method of moving the case is
employed, take extreme care and ensure the case is supported
ĂĚĞƋƵĂƚĞů LJ Ăƚ Ăů ů ƟŵĞƐ͘
NOTE
NOTE
/ŶƐƚĂů ů ĂƟŽŶ D ĂŶƵĂů
4
Advertisement
Table of Contents
