Concluding Work - Siemens SIREMOBIL Iso-C Service Instructions Manual

16
2
Fig. 32
•
Reattach the cover plate (1/Fig. 32).
•
Secure the cable to the switch board with cable clamps.
•
Reattach the lower telescope cover (1/Fig. 33).
•
Reattach the cover (2/Fig. 33) at the Velcro closures.
•
Reconnect plug X1 to the cover with the brake switches.
•
Reconnect the protective conductor to the cover with the brake switches.
•
Remount the cover with the brake switches to the horizontal carriage.

Concluding work

•
Check the horizontal lift for ease of movement.
•
Check the angulation for ease of movement.
•
After completing all service work and reattaching the covers, perform the protective
conductor test in accordance with ARTD-002.731.17.
•
Perform a function test on the SIREMOBIL.
TD SD 24 / Arnold
TD SD 24 / Groß
SMS Iselin / O'Donnell
SIREMOBIL Iso-C
Replacing the horizontal lift brake
1
S3
S4
SPR2-230.076.01
Rev. 01
2
Fig. 33
Page 16 of 16
02/99 TD SD 24
1
Siemens AG
Medical Engineering
1