Siemens SIREMOBIL Iso-C Service Instructions Manual page 14

14
Fig. 28
2
3
Fig. 30
•
Reattach the back cover (1/Fig. 28).
•
Reattach the plate (1/Fig. 29 .
•
Reattach the cable guide (1/Fig. 30). Make sure that the cable bundle is routed properly.
•
Reattach the cable bundle (2/Fig. 30). When doing this, make sure that the horizontal
brake cable cannot rub against the horizontal carriage. If necessary, press it slightly in
the recess with a flat object.
•
Place the cable clamp over the bracket (3/Fig. 30).
•
Reattach the cable bundle with the cable clamp (1/Fig. 31). When doing this, make sure
that the cable bundle is routed correctly. (Refer to Fig. 30).
•
Do not attach the cable for the brake switches (connector X1) with the other cables in the
cable clamp (1/Fig. 31).
SIREMOBIL Iso-C
Replacing the horizontal lift brake
1
1
5
4
Fig. 29
Fig. 31
SPR2-230.076.01
Rev. 01 02/99
1
1
2
Page 14 of 16
TD SD 24 Medical Engineering
Siemens AG