Display Setup - Crestron TS-770 Product Manual

Display Setup

Tap Display Setup on the Setup screen to display the Display Setup screen.
Display Setup Screen
The value shown under Illuminance represents the units of light (in lux) that are received by
l
the touch screen. This value changes in real time depending on the light received by the
touch screen.
Tap the up or down arrow buttons under Brightness to raise or lower the LCD display
l
brightness level incrementally from 0 to 100%.
Tap On or Off under Auto Brightness to turn automatic brightness on or off for the
l
display.
Drag the slider up and down under LCD ALS Threshold to adjust the ALS (ambient light
l
sensor) threshold value for switching between high and low auto-brightness presets on
the LCD display.
Tap On or Off under Proximity Wake to turn proximity waking on or off for the display.
l
When proximity waking is on, the touch screen will wake from standby automatically when
a user gets within proximity of the touch screen.
Product Manual — Doc. 8555D TS-770 and TS-1070 • 11