Details - Citizen iDP-3310 User Manual

10.3.2 Details

LF
[Function] Line Feed
[Code] <0A>H
[Outline] This command prints the data in the print buffer and feeds the paper by one line.
If printing is completed, the command will move a printing position to the left margin and
clear the print buffer. This is a standard command to print one line of the text.
[Caution] In other than the P-250 mode and P-900R mode, this command will be ignored immediately
after one-line buffer-full printing. In the P-250 mode and P-900R mode, printing will not be
performed until this command is received.
[See Also] ESC a, ESC b, CR
CR
[Function] Print
[Code] <0D>H
[Outline] 1. When the DSW1-5 are set to ON
2. When the DSW1-5 are set to OFF
[Caution] This command is ignored immediately after one-line buffer-full printing.
This command is also ignored in the P-200 mode, P-250 mode, and P-900R mode.
[See Also] ESC a, ESC b, LF
command will print the data and feed the line. If not, it will feed the line.
; This command is ignore
; If there is some data in the print buffer, the
37
iDP3310 User's Manual
ALL
iDP-562
CITIZEN