Table of Contents
Advertisement
ESC * m n1 n2 [d] k
[Function]
Specify Bit Image Mode
[Code]
<1B>H<2A>H<m><n1><n2>[<d>]k
[Range]
m = 0, 1
0 n1 252
n2 = 0
0 d 255
k = n1 + 256 n2
[Outline]
This command specifies the bit image of the m-mode as to the numbers of dots specified with
n1 and n2.
Divide the number of dots printed by 256 and assume a quotient to be n2 and a remainder
to be n1. Therefore, the number of horizontal dots will be n1 + 256 x n2.
If the bit image data is input beyond the number of dots printable in one line, the surplus
data will be discarded.
d denotes the bit image data. Set "1" in the corresponding bit to print, and "0" not to print.
The following table lists the bit image modes selected by m.
The upper figure in the Max. Dots column is for the P-200 mode or 40-column mode, and
the lower figure is for the P250 mode, P-900R mode, or 42-column mode, respectively.
[Caution]
If the m-value is beyond the limits, the data after n1 will be processed as normal data. Normal
data processing is restored after printing the bit image.
[Sample Program] LPRINT CHR$(&H1B)+"
LPRINT CHR$(&H81)+CHR$(H42)+CHR$(&H24)+CHR$(&H18);
LPRINT CHR$(&H18)+CHR$(&H24)+CHR$(&H42)+CHR$(&H81);
LPRINT CHR$(&HC8)+CHR$(&H8F);
m
Mode
0
8-dot single density
1
8-dot double density
*
"+CHR$(0)+CHR$(10)+CHR$(0);
Vertical Direction
Dots
Dot Density
8
77DPI
8
77DPI
49
iDP3310 User's Manual
Horizontal Direction
Dot Density
Max. Dots
120
50DPI
126
240
101DPI
252
CITIZEN
ALL
Advertisement
Table of Contents
