2.3 Paper Specifications
2.3.1 Recommended Paper
Type
Paper width
Paper thickness
Roll diameter
Printed surface
Recommended paper
Core
CAUTION :
2.3.2 Print Position
: Thermal paper
: 80 plus 0/minus 1 mm
: 60 90 m
:
80mm or less
: Outside of the roll (Surface)
: TF50KS-E2C by Nippon paper Mil. Or other equivalent
:
12mm (Inner diameter)
Print quality may vary if you use paper other than specified.
In such case, change print density by dip switch setting.
(See "5. Dip Switch Setting")
Do not paste the paper to the core.
Chemicals or oil may change the color of paper, or printed characters may be
vanished.
Thermal paper color may be changed if scratched with a nail or something sharp.
Change of paper color starts at approx. 70 C. Pay attention to heat, humidity and sun
light.
5
iDP3310 User's Manual
CITIZEN