Table of Contents
Advertisement
ESC f (n) ;
[Function]
Select Line Attribute
[Code]
<1B>H<66H>(n)<3B>H
[Range]
0 (n) 3 (<30>H n <33>H)
[Outline]
This command is used to select the attribute required to be applied to the entire line at one
time. In combination with the double-width command (SO, RS), it can print quadruple-width
characters.
n = 2 or 3 has not been defined.
[Caution]
Be sure to add ";"(<3B>H) to the end of the parameter.
[Default]
n = 0
[See Also]
SO, SI, RS, US
ESC h (n) ;
[Function]
Select Character Set
[Code]
<1B>H<68H>(n)<3B>H
[Range]
0 (n) 10 (<30>H
[Outline]
This command selects the character sets of the countries listed below, depending on the n-
value.
[Caution]
Be sure to add ";"(<3B>H) to the end of the parameter. As shown separately, the character
sets replace part of characters. If the n-value is specified beyond the limits, this command
will be ignored.
[Default]
n = 0
[See Also]
11.3 International Character Codes Table
[Sample Program] When setting the character sets to Japan
ESC h 8 ;
<1B>H<68>H<38>H<3B>H
n
0
1
n <39>H)
n
Function
0
U.S.A.
1
France
2
Germany
3
U.K.
4
Denmark I
5
Sweden
LPRINT CHR$(&H1B)+"h8;" ;
Function
Normal characters
Double-height characters
n
Function
6
7
8
9
Norway
10
Denmark II
46
iDP3310 User's Manual
Italy
Spain
Japan
ALL
ALL
CITIZEN
Advertisement
Table of Contents
