Table of Contents
Advertisement
FF
[Finction]
Eject Paper
[Code]
<0C>H
[Outline]
This command prints the data in the print buffer and ejects the paper by one inch,
regardless of the current setting of line height. This command allows you to view the last
line of the text and leaves an adequate margin in order to cut the paper.
This command prints the data in the print buffer and feeds the paper by one page.
[Caution]
In the 40- and 42- column modes, note that paper feed is also counted as one page worth of
lines.
[See Also]
ESC a, ESC C, ESC O
CAN
[Function]
Clear Print Buffer and Cancel Character Attribute
[Code]
<18>H
[Outline]
This command clears the contents of the print buffer without printing and resets the character
attribute and other attributes to Inactive or Default.
[Caution]
If the printer has started printing from the print buffer, this command will be ignored.
[See Also]
ESC c
P-200 mode, P-250 mode, P-900R mode.
40-column mode, 42-column mode
38
iDP3310 User's Manual
ALL
ALL
CITIZEN
Advertisement
Table of Contents
