2.3 Paper Specifications; Recommended Paper - Citizen CBM-270 User Manual

2.3 Paper Specifications

2.3.1

Recommended Paper

(1) Thermal paper roll
• Type
• Paper width
• Paper thickness
• Roll diameter
• Printing surface
• Recommended paper
• Core
(2) Thermal label paper(L and M spec. only)
• Type
• Paper width
• Label width
• Label length
• Label interval
• Black mark width
• Paper thickness
• Roll diameter
• Printing surface
• Recommended paper
• Core
CAUTION:
1. Use of non-specified paper may cause irregularity of print density. If this is the case, use the DIP switch to
reset print density. (See 5. DIP SWITCH SETTING)
2. Do not paste the paper to the core.
3. If the paper comes in contact with a chemical or oil, it may discolor or lose a record.
4. Do not rub the paper surface strongly with a nail or hard metal. It may discolor.
5. Discoloring starts at about 70°C. Watch out for effects of heat, humidity, light, and so on.
6. Do not use the label paper when the printer has been set for thermal paper, and vice versa. Be careful not
to mistake a type of label paper. It could cause malfunctioning or damage the printing head.
: Thermal paper
: 58 + 0/- 1 mm
∼
: 60 75µm
: φ83 mm or less
: Outside of the roll (Surface)
: TF50KS-E2C (Monochrome) made by NIPPON SEISHI or its equivalent
735FA(2-color, Black based) made by RICOH or its equivalent
PB670(2-color, Red based) made by MITSUBISHI SEISHI or its
equivalent
: φ12 mm(Inner dia.), φ18 mm (Outer dia.)
: Thermal paper (Printing surface)
: 58 + 0/- 1 mm
: 56 mm or less
∼
: 25 300 mm (For label interval detection)
∼
25 300 mm (For black mark detection)
∼
: 3 300 mm (Black mark interval for the black mark detection)
: 15 mm or more (From the center of the paper, black paper only)
: 150µm or less
: φ70 mm or less (Depends on the outer diameter of the core)
: Outside of the roll (Surface)
: For label interval detection
KPT86S P22 G63BC (Monochrome) made by OHJI TUCK or its
equivalent
For black mark detection
KPT865P (Monochrome) made by OHJI TUCK or its equivalent
: φ25 mm or more (Outer dia.), 3 mm thick
4
CBM-270 User's Manual
∗ Black mark section excluded
CITIZEN