Cisco Linksys SGE2010P Admin Manual page 26

SSL Generate Certificate
Use the SSL Certificate Generation screen to view, edit, and execute device-generated
certificates.
To open this screen:
1. From the Switch Main Menu, select 1. System Configuration.
2. From the System Configuration menu, select 4. Security Settings.
3. From the Security Settings Menu, select 1. SSL Generate Certificate.
To edit and execute a certificate:
1. Select Edit, and then make your changes. Press the Tab key to move the cursor from field to
field.
2. Press the Esc key to move the cursor to the Action list.
3. Select Execute to generate the certificate with the new parameters.
4. When the Operation complete message appears, press the Esc key to move the cursor to the
Action list.
The following fields are specified:
Public Key Algorithm
Public Key Length
Common Name (FQCN)
Department Name
Organization Name
Locality or City Name
State or Province Name
SGE2010/SGE2010P Administration Guide
Specifies the SSL type
Specifies the SSL RSA key length. (Range: 512 to 2048)
IP address of the Ethernet switch
Specifies the department name. (Range: 1 to 32 characters)
Specifies the organization name. (Range: 1 to 32
characters)
Specifies the location or city name. (Range: 1 to 32
characters)
Specifies the state or province name. (Range: 1 to 32
characters)
Using the Console
System Configuration
23