Cisco Linksys SGE2010P Admin Manual page 21

To open this screen:
1. From the Switch Main Menu, select 1. System Configuration Menu.
2. From the System Configuration Menu, select 2. Management Settings.
3. From the Management Settings Menu, choose 2. Telnet Configuration.
To change the time-out setting:
1. Select Edit, and then make your changes.
2. Press the Esc key to move the cursor to the Action list.
3. Select Save to save your changes.
4. When the Operation complete message appears, press the Esc key to move the cursor to the
Action list.
SSH Configuration
The SSH Configuration menu provides access to screens where you can configure SSH server
settings, generate crypto keys, and generate keys fingerprints.
1. SSH Server Configuration (see page 19)
2. SSH Status (see page 19)
3. SSH Crypto Key Generation (see page 20)
4. SSH Keys Fingerprints (see page 21)
0.Back (Select to return to the previous menu.)
To open this screen:
1. From the Switch Main Menu, select 1. System Configuration Menu.
2. From the System Configuration Menu, select 2. Management Settings.
3. From the Management Settings Menu, choose 3. SSH Configuration.
SGE2010/SGE2010P Administration Guide
Using the Console
System Configuration
18