Cisco Linksys SGE2010P Admin Manual page 23

Using the Console
System Configuration
To open this screen:
1. From the Switch Main Menu, select 1. System Configuration Menu.
2. From the System Configuration Menu, select 2. Management Settings.
3. From the Management Settings Menu, choose 3. SSH Configuration.
4. From the SSH Configuration Menu, select 2. SSH Status.
5. When you finish using this screen, select Quit.
SSH Crypto Key Generation
Use the SSH Crypto Key Generation screen to generate an SSH RSA or DSA key.
To open this screen:
1. From the Switch Main Menu, select 1. System Configuration Menu.
2. From the System Configuration Menu, select 2. Management Settings.
3. From the Management Settings Menu, choose 3. SSH Configuration.
4. From the SSH Configuration Menu, select 3. SSH Crypto Key Generation.
5. When you finish using this screen, select Quit.
To change SSH Crypto Key Generation settings:
NOTE: Only the public key algorithm can be changed.
1. Select Edit, and then make your changes.
2. Press the Esc key to move the cursor to the Action list.
3. Select Save to save your changes.
4. When the Operation complete message appears, press the Esc key to move the cursor to the
Action list.
SGE2010/SGE2010P Administration Guide 20