Management Settings - Cisco Linksys SGE2010P Admin Manual

To change the system contact, system name, and location:
1. Select Edit, and then make your changes. Press the Tab key to move the cursor from one
field to the next.
2. Press the Esc key to return to the Action list.
3. Select Save to save your changes.
4. When the Operation complete message appears, press the Esc key to move the cursor to the
Action list.

Management Settings

The Management Settings screen provides access to screens where you can change the settings
for serial port, telnet, and secure telnet (SSH).
1. Serial Port Configuration (see page 17)
2. Telnet Configuration (see page 17)
3. SSH Configuration (see page 18)
0.Back (Select to return to the previous menu.)
To open this screen:
1. From the Switch Main Menu, select 1. System Configuration Menu.
2. From the System Configuration Menu, select 2. Management Settings.
SGE2010/SGE2010P Administration Guide
Using the Console
System Configuration
16