Cisco Linksys SGE2010P Admin Manual page 22

Using the Console
System Configuration
SSH Server Configuration
Use the SSH Server Configuration screen to view or edit the status of the SSH server. You can
enable or disable the server and configure the SSH server port
To open this screen:
1. From the Switch Main Menu, select 1. System Configuration Menu.
2. From the System Configuration Menu, select 2. Management Settings.
3. From the Management Settings Menu, choose 3. SSH Configuration.
4. From the SSH Configuration Menu, select 1. SSH Server Configuration.
To change SSH Server settings:
1. Select Edit, and then make your changes.
2. Press the Esc key to move the cursor to the Action list.
3. Select Save to save your changes.
4. When the Operation complete message appears, press the Esc key to move the cursor to the
Action list.
SSH Status
Use the SSH Status screen to view information about SSH sessions.
SGE2010/SGE2010P Administration Guide 19