Save A Caller Id Log Entry To The Call Block List - AT&T GL2101 Complete User's Manual

Caller ID
Caller ID operation

Save a caller ID log entry to the call block list

1. While reviewing the caller ID log, press CID or DIR to browse through the
caller ID log.
2. When the desired entry displays, press
3. Press CID or DIR to choose To Call block, then press
/SELECT.
MENU
4. When the screen shows Enter number, use the dialing
keys to modify the telephone number (up to 30 digits), if
necessary.
Press CID or DIR to move the cursor to the left
X
or right.
Press and hold PAUSE to enter a 3-second dialing pause (a P appears).
X
Press DELETE to erase a digit.
X
Press and hold DELETE to erase all digits.
X
/SELECT to save the number in the display. The screen shows
5. Press
MENU
Enter name.
6. Use the dialing keys and refer to Character chart on page 34 to modify
the name (up to 15 characters), if necessary.
Press 0 to add a space.
X
Press CID or DIR to move the cursor to the left or right.
X
Press DELETE to erase a character.
X
Press and hold DELETE to erase all characters.
X
/SELECT to save. You hear a confirmation tone.
7. Press
MENU
Note: The screen shows Number repeated if the number is already in the call block list. You cannot save the same
number more than once.
/SELECT.
MENU
45
To Call block
ECO