Dial Mode - AT&T GL2101 Complete User's Manual

Telephone settings
Handset settings

Dial mode

The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To set the dial mode:
1. Press MENU/
2. Press or
CID
/SELECT.
MENU
3. Press or
CID
/SELECT .
MENU
4. Press or
CID
/SELECT.
press
MENU
Note: If you have dial pulse (rotary) dialing service only, refer to Temporary tone
dialing on page 23 to temporarily switch from pulse to touch-tone dialing during a
call.
in idle mode.
SELECT
to highlight Settings, then press
DIR
to highlight Dial mode, then press
DIR
to choose Touch-tone or Pulse, then
DIR
20
Dial mode
ECO
Touch-tone
ECO