Telephone settings
Handset settings
NOTE: If in the future, your telephone service provider requires you to dial 10 digits to make
a local call (area code plus telephone number), you need to delete your home
area code and dial out locally from the caller ID log. With the home area code displayed,
press and hold
The home area code is now restored to its default setting of _ _ _ (empty).
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To set the dial mode:
1. Press MENU/
2. Use q
or p
CID
/SELECT.
MENU
3. Use q
or p
CID
/SELECT.
MENU
4. Use q
or p
CID
/SELECT. There is a confirmation tone and the screen
MENU
returns to the previous menu.
Website
Use this feature to view the AT&T website address.
1. Press MENU/
2. Use q
or p
CID
/SELECT.
MENU
/DELETE until the digits are deleted, and then press
MUTE
in idle mode to enter the main menu.
SELECT
to scroll to >Settings, then press
DIR
to scroll to >Dial mode, then press
DIR
to highlight >Tone or >Pulse, then press
DIR
in idle mode to enter the main menu.
SELECT
to scroll to >Website, then press
DIR
16
/SELECT.
MENU
Home area code
>Dial mode
p
q
DIAL MODE
>Tone
p
q
Settings
Website
>
p
q
www.telephones.
att.com