Automower ® Connect - Husqvarna AUTOMOWER EPOS Operator's Manual

Note: Operate the product in a straight line
for 7 m / 7 ft. in front of the charging station
and let the product enter the charging
station.
6. Operate the product with the
straight line for 2 m / 7 ft. into the charging
station.
Set point to make a set point on the
7. Select
map. The app draws straight lines between
the set points. Use many set points to get
smooth curves.
Undo to remove the latest set
Note: Select
point on the map.
Set point when the product is in the
8. Select
charging station.
Save .
9. Select
3.6.16 To activate the Site
Site , you first must enable the Site . The
To use a
Virtual boundary and Virtual guide are grey when
they are disabled.
Load site and select the Site you will
1. Select
to enable.
Activate site .
2. Select
3. Enter the PIN code.
®
3.7 Automower Connect
The app gives 2 modes of connectivity: Long-
range cellular connectivity and Short-range
®
Bluetooth connectivity.
The product can connect to mobile devices that
®
have the Automower Connect app installed.
®
Automower Connect is a free app for your
mobile device. The Automower
gives extended functions to your Husqvarna
product. You can:
• See the status of your product.
• Change settings to your product.
• Get extended product information.
• Get an alarm if the product moves out of the
work area.
• See statistics of your product.
Note: All countries do not support Automower
Connect because of regional specified cellular
systems. The included Automower
1460 - 002 - 06.04.2020
lifetime service only applies if there is a third part
sub-supplier of 2G/4G available in the operational
area.
The Automower
appDrive in a
you have one or few products installed. For users
with several products we recommend you to use
Husqvarna Fleet Services
Fleet Services
3.7.1 Dashboard
The dashboard shows the current status of the
product both visually and in text. It is very easy to
control the product by selecting the options, for
example
In the lower part of the dashboard there are
shortcuts to the
The dashboard also shows symbols according to
below:
1.
2.
®
Connect app
For more information about the operating modes
Start, Park and Pause , refer to Operation on
page 40 .
3.7.2 Account
In this menu there is an overview of the account
®
settings and you can log off from the app.
®
Connect
®
Connect app is preferable if
™
. Refer to
™
on page 39 .
Park .
Schedule settings and the Map .
The battery status shows the battery state of
charge. A flash is shown over the battery
symbol when the product charges its
battery. A plug is shown over the battery
symbol when the product is in the charging
station without charging.
Cutting height.
Husqvarna
Installation - 31