Led Indicator Lamp On The Charging Station; Led Indicator Lamp On The Product - Husqvarna AUTOMOWER EPOS Operator's Manual

6.4 LED indicator lamp on the charging station

For a fully functional installation, the indicator lamp in the charging station must show a solid or flashing
green light. If another color shows, follow the troubleshooting guide below.
There is more help on www.husqvarna.com. If you still need help, speak to your local Husqvarna
representative.
Light Cause
Green solid light
Good signals
Green flashing light The signals are good and ECO mode is
activated.
Red flashing light
Interruption in the charging station's an-
tenna.
Red solid light
Fault in the circuit board or incorrect
power supply in the charging station.

6.5 LED indicator lamp on the product

The LED indicator lamp on top of the product shows the current status:
Light Cause
Green solid light
The product is either mowing the lawn,
or leaving the charging station. The ac-
curate position is good.
Green pulsating
The product is either mowing the lawn,
light
or leaving the charging station. The ac-
curate position is bad.
Green flashing The product is paused.
light
Red solid light
The product has stopped due to an er-
ror.
Red flashing light
The product has stopped due to an er-
ror.
Yellow solid light
The STOP button has been pushed.
The accurate position is good.
Yellow pulsating
The STOP button has been pushed.
light
The accurate position is bad.
Yellow flashing
The product requests the PIN code.
light
54 - Troubleshooting
Action
No action.
ECO mode on
No action. Refer to
page 34 .
Speak to your local Husqvarna repre-
sentative.
The fault must be correct by an au-
thorized service technician. Speak to
your local Husqvarna representative.
Action
No action.
No action.
No action.
Correct the cause for the error. Push
the STOP button, and then push the
START button to start the product.
Correct the cause for the error. Push
the STOP button, and then push the
START button to start the product.
Push the START button to start the
product.
Push the START button to start the
product.
Confirm the PIN code in the Automow-
®
er Connect app before you start the
product.
1460 - 002 - 06.04.2020