Introduction; Support; System Description; Product Description - Husqvarna AUTOMOWER EPOS Operator's Manual

Serial number:
PIN code:
The serial number is on the product rating plate and on the product carton.

1.1 Support

For support about the product, speak to your
Husqvarna servicing dealer.

1.2 System description

The EPOS system contains a robotic lawn
mower, a charging station and a reference
station. The robotic lawn mower and the
reference station receives satellite signals for
positioning. The reference station is stationary
and sends correction data to the robotic lawn
mower to get a accurate position. The work area
for the product is made virtually in an app by
operating the product and add set points to make
a map in an app. Refer to
page 4 .

1.3 Product description

Note: Husqvarna regularly updates the
appearance and function of the products. Refer
Support on page 3 .
to
The product is a robotic lawn mower. The product
has a battery power source and cuts the grass
automatically. It continuously alternates between
mowing and charging. The movement pattern is
random, which means that the lawn is mowed
evenly and with less wear. The
Virtual guide controls the movement of
and the
the product within the work area. Sensors in the
product senses when it is approaching the
boundary . The front of the product always passes
the Virtual boundary by a specific distance before
the product turns around. When the product hits
an obstacle or approaches the
the product selects a new direction.
1460 - 002 - 06.04.2020

1 Introduction

System overview on
Virtual boundary
Virtual
Virtual boundary
The operator selects the operation settings in the
®
Automower Connect app. The app shows the
selected and possible operation settings, and the
operation mode of the product.
1.3.1 Mowing technique
The product is emission free, easy to use and
saves energy. The frequent cutting technique
improves the grass quality and decreases the
use of fertilizers. Collection of grass is not
necessary.
1.3.2 Find the charging station
The product operates until the battery state of
charge is low, then it starts to go to the charging
station. The product has 3 search methods to find
the charging station. Refer to
station on page 34 .
1.3.3 Connectivity
To communicate and make settings for this
product 2 mobile applications are used. The
EPOS app is used for the installation of the
product and communicates with Bluetooth
operation of the product the Automower
Connect app is used. Automower
communicates with Bluetooth
connectivity.
To find the charging
®
. For
®
®
Connect
®
and cellular
Introduction - 3