Esc K Select Font; Esc T Select Character Code Set - Brother RJ-4030 Software Manual

ESC k Select font
ASCII: ESC
Decimal: 27
Hexadecimal: 1B
Parameters
0≤n≤4, 9≤n≤11
Description
Selects the font.
n=0 Reserved
n=1 Letter Gothic Bold (fixed pitch)
n=2 Reserved
n=3 Helsinki (proportional pitch)
n=4 Reserved
The default value is n=1 (Letter Gothic Bold (fixed pitch)).
If the font is changed from a bitmap font to outline font, the character size is changed to the default setting
(32 dots).
If the font is changed from an outline font to bitmap font, the character size is changed to default setting
(24 dots).
ESC t Select character code set
ASCII: ESC
Decimal: 27
Hexadecimal: 1B
Parameters
n=0, 1, 2
Description
From the three built-in character code sets, selects the character code set used.
n=0: Standard character code set
n=1: Eastern European character code set
n=2: Western European character code set
The default setting is n=0.
k n
107 n
6B n
Bitmap Fonts
t n
116 n
74 n
n=9 Letter Gothic (fixed pitch)
n=10 Reserved
n=11 Helsinki (proportional pitch)
- 22 -
ESC/P Command Reference
Outline Fonts
5. Control Command Details