Align The Print Head - Canon SELPHY DS810 Photo Printing Manual

Printing Maintenance

Align the Print Head.

(2) Press the
least irregular patterns and use the
corresponds.
Repeat the operation for the column C and D.
(3) Press the OK button.
The Print Head position is adjusted.
Note
Printing a current setting of the Print Head position
1 Turn on the printer.
See "Turning On the Printer" on page 16.
2 Load the supplied paper or Canon 4"×6"/ 101.6×152.4mm paper into the Paper
Support. See "Loading Paper" on page 20.
3 Press the Menu button.
4 Select Tool box and then press the OK button.
5 Select Maintenance and then press the OK button.
6 Select Head alignment print and then press the OK button.
The pattern print confirmation screen is displayed.
7 Select Yes and then press the OK button.
The Head alignment value is printed.
70
(1) Look at the print out. From the patterns on the
button to move the cursor on the column B and select the most even,
column A, select the most even, least irregular
patterns and use the
number that corresponds.
buttons to select the number that
buttons to select the