Printing A Specified Area—Trimming - Canon SELPHY DS810 Photo Printing Manual

Printing from the Memory Card
Printing a Specified Area—Trimming
You can print a specified area of the photo displayed on the LCD.
Note
Please trim the photo after specifying Page size, Media type, and Borderless/Bordered
on each settings screen. If you change the settings after trimming the photo, the
trimmed selection will be lost.
Select the photo to trim.
Use the
Set the Trimming Mode.
Trim the sections you want to print.
• Trimming button: you can rotate the trimming area.
•
• buttons: you can enlarge or reduce the trimming area.
Finalize the trimmed area.
(1) Press the OK button.
The trimming area is fixed and the original photo is displayed.
Notes
• Trimming limits are displayed on photographs that have been trimmed.
• Once the trimmed area is finalized, if you press the Trimming button again, you can
modify the trimmed area.
• If you want to cancel the trimming mode, press the Trimming button and then press
the Stop/Reset button in the Trimming screen. Removing the memory card also
cancels the trimming mode.
• You cannot save the trimmed image to a memory card.
34
buttons to select the photo.
buttons: you can move the trimming area.
Press the Trimming button on the operation
panel.
The printer is now in Trimming Mode.