Preparation When Using The Printer; Turning On/Off The Printer - Canon SELPHY DS810 Photo Printing Manual

Preparation When Using the Printer

Preparation When Using the Printer

Turning On/Off the Printer

This section describes the method to turn on/off the printer.
Turning On the Printer
Follow the procedure below to turn on the printer.
Plug the Power Cord into the back of the printer and connect the other
end to a power outlet.
Press POWER to turn the printer on.
The POWER lamp flashes then changes to
steady (non-flashing).
The menu screen appears on the LCD. At
this point, only the Tool box menu is
available for selection. Inserting a
memory card that contains stored photos
makes all menus available for selection.
See "Printing Photograph Displayed on
the LCD—Photo Gallery" on page 28 for
the instruction on selecting among
menus and displaying a photo stored in a
memory card.
Turning Off the Printer
Follow the procedure below to turn off the printer.
Check the following before turning off the printer.
• The Indicator lamp of the memory card is not flashing.
• The POWER lamp is not flashing.
• The printer is not printing.
Important
Data in the memory card may be damaged if you remove the memory card or
turn off the printer when the Indicator lamp is flashing.
16
Indicator lamp