Getting Started; Finishing Your Workout - Horizon Fitness ANDES 3 Operation Manual

GETTING STARTED

Select your xID account, Use, Guest, or Edit a Use using
press ENTER.
When you log in for the first time as Use 1-4, you will be prompted
to enter your xID information.
a) Enter your xID account number using
should press ENTER to confirm it .After the final input, press
ENTER.
b) Enter your passcode using
ENTER to confirm it .After the final input, press ENTER.
c) If you key the incorrect number during entering your xID or
pascode, press CHANGE DISPLAY to delete the last entered
number.
QUICK START
1) Make sure the power is on.
2) Press START / STOP
3) Press to adjust resistance level during the workout.
START YOUR WORKOUT
1) Select guest / user1 / user2 / user3 / user4.
2) Select your weight.
3) Select your age.
4) Select your desired program.
5) Select your gender (required only under Fit-Test program).
6) Select the program settings, time, level, etc.
7) Press Start/Stop
Note: Console will save your setting for user 1 / 2 / 3 / 4 ready for
next workout.
HZ15_OG_Andes 3_5_7i_r1_0 011516'.indd 13
each number you
each number you should press
to start exercise in MANUAL mode.
to start your workout.
TO CLEAR SELECTION/RESET THE
CONSOLE
and
Hold START/STOP

FINISHING YOUR WORKOUT

When your workout is complete, the bike will stop
and beep. You can unplug the machine or it will enter
Energy Saver Mode in 15 mins.
for 3 seconds.
13
2016/1/15 上午11:36