Table of Contents
Advertisement
%
The emergency spare wheel is only available
in certain countries.
Spare wheel bracket on the rear-end door
Stainless-steel spare wheel bracket
Removing a stainless-steel spare wheel
bracket
Remove screwdriver
4
from the vehicle tool
#
kit (
page 379).
/
Open the lock on cover ring
1
#
driver 4.
Fold tab
3
down.
#
Pull cover ring
1
apart and remove it.
#
Remove cover panel 2.
#
Removing the spare wheel
Remove wheel nuts 5.
#
Remove the spare wheel.
#
with screw‐
Securing the wheel to the spare wheel
bracket
Use nuts
5
to secure the faulty wheel to the
#
spare wheel bracket. Specified tightening
torque: 14.75 lb-ft (20 Nm)
Position cover panel
#
that retainer
6
in recess 7.
Attach cover ring
#
lock.
%
Make sure that the lock does not cover the
rear view camera. If necessary, turn cover
ring
1
slightly.
Breakdown assistance 343
2
again. Make sure
of cover panel
2
engages
1
again and close the
Advertisement
Table of Contents
