Mercedes-Benz G Series Operator's Manual page 144

Hide thumbs Also See for G Series:
Table of Contents

Advertisement

142 Driving and parking
Shifting the transfer case
Shifting to the LOW RANGE off-road gear
Requirements:
You are not driving on a paved or public road.
R
The engine is running and you are not driving
R
faster than 25 mph (40 km/h).
Press LOW RANGE
1
button.
#
The shift request stays active for a maximum
of 30 seconds. If all requirements have not
been fulfilled within this time, shift operation
must be started again.
Switch the transmission to position i.
#
If shift operation is successful, the
RANGE On
message appears in the instru‐
ment cluster, an audible signal sounds. The
vehicle changes automatically to the O
drive program.
Switch the transmission to position h.
#
%
At a speed below 2 mph (3 km/h) the brake
must be actuated when shifting from i to
h. At 2 mph (3 km/h) or higher, the brake
no longer has to be actuated to shift to h.
%
The vehicle stays in LOW RANGE if you park
the vehicle in LOW RANGE, even after the
engine has been restarted. The O drive
program is activated (
page 136).
/
In the on-road position, shift to HIGH RANGE
Requirements:
The engine is running and you are not driving
R
faster than 43 mph (70 km/h).
Press LOW RANGE
#
The shift request stays active for a maximum
LOW
of 30 seconds. If all requirements have not
been fulfilled within this time, shift operation
must be started again.
Shift the transmission to position i.
#
If shift operation is successful, the
RANGE Off
message appears in the instru‐
ment cluster, an audible signal sounds.
Shift the transmission to position h.
#
%
At a speed below 2 mph (3 km/h) the brake
must be actuated when shifting from i to
h. At 2 mph (3 km/h) or higher, the brake
no longer has to be actuated to shift to h.
1
button.
LOW

Advertisement

Table of Contents
loading

This manual is also suitable for:

G 550 2021

Table of Contents