Cleaning The Brush Roll; Removing And Cleaning The Caster Wheel - Bissell SPINWAVE 2931N Manual

Cleaning the Brush Roll

Check out the BISSELL Connect App for tips and videos on Brush Roll Maintenance.
1.
Turn the Power Switch
OFF. Pinch the tabs on the
brush guard inward and pull
to remove. Lift to remove the
Brush Roll.

Removing and Cleaning the Caster Wheel

For more help with maintaining your robot, open up the BISSELL Connect App.
1.
Turn the Power Switch
OFF. Set your robot on a soft
surface and pull up firmly on
the caster wheel.
WARNING
troubleshooting checks.
2.
Clean the Brush Roll with
the Cleaning Tool.
2.
Clean out any visible hair
and debris with a dry cloth.
To reduce the risk of electric shock, turn the Power Switch OFF before performing maintenance or
3.
Replace the Brush Roll and
brush guard. Note: The Brush
Roll has two different end
pieces. Ensure the square-
shaped end piece is inserted
into the square-shaped port.
3.
To reinstall the caster wheel,
push down firmly until you
hear a "click".
global.BISSELL.com 7