Bissell SPINWAVE 2931N Manual
  1. Manuals
  2. Brands
  3. Bissell Manuals
  4. Vacuum Cleaner
  5. SPINWAVE 2931N
  6. Manual

Bissell SPINWAVE 2931N Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

SPINWAVE® ROBOT
MODEL 2931N
What's in the Box? .......................................................... 2
Docking and Charging Your Robot ..................... 2
Connecting to the App ................................................ 3
Automatic Cleaning ........................................................ 3
Dry Vacuum Mode ..........................................................4
Mop Mode ............................................................................. 5
Cleaning the Brush Roll ................................................7
Cleaning the Sensors ..................................................... 8
Replacing the Battery ................................................... 9
Troubleshooting ..............................................................10
Storing Your Robot .......................................................10
Product Overview
1. Tank Release Button
2. Power Switch
3. Mop Pads
4. Bumper
5. Start/Pause Button
6. Edge Cleaning Brushes
This guide features everything you need to get ready for first use,
including setting up, using and maintaining your machine.
For additional support, download the BISSELL Connect App.
1
2
3
4
6
5

Advertisement

Table of Contents
loading

Related Manuals for Bissell SPINWAVE 2931N

Summary of Contents for Bissell SPINWAVE 2931N

  • Page 1: Table Of Contents

    3. Mop Pads 4. Bumper 5. Start/Pause Button 6. Edge Cleaning Brushes This guide features everything you need to get ready for first use, including setting up, using and maintaining your machine. For additional support, download the BISSELL Connect App.

  • Page 2: What's In The Box

    Pulse Once > Fade In > 30 seconds > Fade Out Activation Sound Charging Breathing Pulse Once > Breathing for 30 seconds > Off 1 Beep Pairing Mode Blink 1 Beep Paired Solid for 5 Seconds > Fade Out 3 beeps Docking Slow Pulsing, White None 2 global.BISSELL.com...

  • Page 3: Connecting To The App

    Download the BISSELL Connect App to set up automatic features. You can designate a day and time for your robot to run automatically using the BISSELL Connect App. Once the robot is connected to the app, go to the Schedule tab and follow the on-screen prompts.

  • Page 4: Dry Vacuum Mode

    Dirt Bin with tap water. filters and filter cover, close filters. Do not wash the filters. Ensure Dirt Bin is completely and push back into the dry before reinstalling. Do not machine. machine wash the Dirt Bin. 4 global.BISSELL.com...

  • Page 5: Mop Mode

    Mop Mode Filling Your Mop Tank In Mop Mode, your robot will clean using dual rear rotating Mop Pads combined with a BISSELL formula to clean your home’s hard floors. Keep plenty of BISSELL® formulas on hand so you can clean whenever it fits your schedule.
  • Page 6 Do not iron or dry clean. To reattach, use the middle The debris trap is located hole on the pads to align with on the back of the tank. Pull the driver. down the door and tip tank to empty debris. 6 global.BISSELL.com...

  • Page 7: Cleaning The Brush Roll

    Cleaning the Brush Roll Check out the BISSELL Connect App for tips and videos on Brush Roll Maintenance. Turn the Power Switch Clean the Brush Roll with Replace the Brush Roll and OFF. Pinch the tabs on the the Cleaning Tool.

  • Page 8: Replacing The Edge Cleaning Brushes

    Sensors and Contacts 1. Cliff Sensors 2. Charging Contact Points 3. Soft Surface Avoidance Sensor WARNING To reduce the risk of electric shock, turn the Power Switch OFF before performing maintenance or troubleshooting checks. 8 global.BISSELL.com...

  • Page 9: Replacing The Battery

    Note: Any other servicing should be performed by an authorized service representative. WARNING To reduce the risk of electric shock, turn the Power Switch OFF before performing maintenance or troubleshooting checks. global.BISSELL.com 9...

  • Page 10: Troubleshooting

    Problem Possible Cause Remedy Too much water is being used. Choose a lower water level in the BISSELL Connect App. Streaking or water spots when Mop Pads are dirty. Attach clean Mop Pads. mopping Debris is trapped on bottom of robot.

Table of Contents