Cleaning The Brush Roll - Bissell SPINWAVE 2859 Series Manual

Dry Vacuum Mode
(continued)
Maintaining the Dirt Bin
1.
Turn the Power Switch OFF.
Press the button on top of the
Dirt Bin and pull to remove.
4.
Use the cleaning tool to
brush the filter cover and
filters. Do not wash the filters.

Cleaning the Brush Roll

Check out the BISSELL Connect App for tips and videos on Brush Roll Maintenance.
1.
Turn the Power Switch
OFF. Pinch the tabs on the
brush guard inward and pull
to remove. Lift to remove the
Brush Roll.
WARNING
troubleshooting checks.
8 BISSELL.com
2.
Open filter door by pulling
both sides apart. Empty the
debris from the Dirt Bin.
5.
With filters removed, rinse
the Dirt Bin with tap water.
Ensure Dirt Bin is completely
dry before reinstalling. Do not
machine wash the Dirt Bin.
2.
Clean the Brush Roll with
the cleaning tool.
To reduce the risk of electric shock, turn the Power Switch OFF before performing maintenance or
3.
Remove the filter cover,
then the foam and pleated
filters.
6.
Once clean, reinstall the
filters and filter cover, close
and push back into the
machine.
3.
Replace the Brush Roll and
brush guard. Note: The Brush
Roll has two different end
pieces. Ensure the square-
shaped end piece is inserted
into the square-shaped port.