Maintaining the Brush Roll
1. Power OFF. Release foot
from extension wand and lay
with brush roll face-up. Push
foot release button on bottom
of foot and lift side plate.
4. Wipe out brush roll
chamber with a cloth.
Note: Any other maintenance or servicing not included in this manual should be performed by an
authorized service representative.
2. Remove brush roll and clear
any debris.
5. To reinstall brush roll, press
button at end of brush roll in
and guide into motorized foot.
3. Optional: Rinse brush
roll with warm water and
let dry for 24 hours before
reinstalling.
BISSELL.com 9