Maintaining The Brush Roll - Bissell FEATHERWEIGHT CORDLESS XRT Manual

Maintaining the Brush Roll

1.
Make sure the vacuum is
OFF. Press the vacuum foot
release button to disconnect it
from the vacuum.
4.
Grasp the Brush Roll and
remove from the Foot.
WARNING
electrical outlet before performing maintenance or troubleshooting.
6 BISSELL.com
2.
Turn the Foot over and find
the Brush Roll Cover Tab. Turn
the screw counter-clockwise
with a coin.
5.
Remove hair wrap from
Brush Roll, Brush Roll End Cap,
and end of Brush Roll.
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
3.
Slide the tab down to
unlock and lift the corner cover
piece.
6.
Place the clean Brush Roll
back into the Foot and use a
coin to turn lock clockwise to
screw into place.