Setting The Paper Size And Type
For copying or photo printing (MP370), on the operation panel, you need to set the size and type
of paper loaded in the multi-purpose tray.
NOTE
• For copying, specify the paper size as described in Chapter 4.
• For photo printing, specify the paper size as described in Chapter 5.
PC
•
For documents printed from your computer, you can specify the paper size and type on your computer.
(See Software Guide, located on your Setup CD-ROM)
Loading Paper
Loading Paper Other Than Envelopes
Follow this procedure:
1
Set the paper thickness lever to the right or left according to the paper
type.
NOTE
• For the appropriate paper thickness lever position for each paper type, see page 15.
• For details on setting the paper thickness lever, see page 21.
2
Open the multi-purpose tray
out the tray extension
• The tray extension can be extended in two parts.
3
Place a stack of paper (print side up) in
the multi-purpose tray
paper guide
side of the stack
IMPORTANT
• Make sure the stack does not exceed the paper
limit mark
22
Paper Handling
, then pull
.
, and pinch the
and adjust it to the left
.
.
1
2
1
2
B
A
Chapter 3