Confirming The Nozzle Check Pattern - Canon MultiPASS MP360 User Manual

Confirming The Nozzle Check Pattern

This section describes how to confirm the nozzle check pattern and print head position pattern.
NOTE
• If the ink level is low, the nozzle check pattern is not printed correctly. If the ink level is low, replace the
relevant ink tank. (See page 78)
If the lines are broken, or white lines are present in pattern
1. Clean the print head. (See page 85)
If the pattern
1. Align the print head. (See page 86)
If white vertical lines are obvious in pattern
1. Align the print head. (See page 86)
84
Maintenance
Broken lines
is not uniform:
Not uniform
White lines
1
2
3
:
White lines
Uniform
:
Chapter 10