Setting Vivid Photo Printing - Canon MultiPASS MP360 User Manual

3. Press [Set].
Ex:
EXTENSION AMOUNT
4. Use [ ] or [ ] to select the extension amount.
– <SMALL> : Reduces the amount of image that extends off the paper.
– <LARGE> : Enlarges the amount of image that extends off the paper.
5. Press [Set].
6. Press [Stop/Reset] to switch the machine to standby mode.

Setting Vivid Photo Printing

Enabling this setting will make photographs appear more vibrant, especially blues and greens. It is
also effective for photographs that were not taken with the correct exposure.
To enable/disable vivid photo printing:
1. Press [PHOTO PRINT].
2. Press [Menu] once until <1.PHOTO PRINT MODE> appears.
3. Use [ ] or [ ] to select the printing method, and then press [Set].
4. Use [ ] or [ ] to select the paper size, and then press [Set].
5. Use [ ] or [ ] to select the paper type, and then press [Set].
6. Use [ ] or [ ] to enable or disable borderless printing, and then press [Set].
7. Use [ ] or [ ] to select date printing or not, and then press [Set].
• <VIVID PHOTO> is displayed on the LCD.
Ex:
6.VIVID PHOTO
NOTE
• The menu number may differ, depending on the photo print settings.
8. Use [ ] or [ ] to enable or disable vivid photo printing.
– OFF: Disables vivid photo printing.
– ON: Enables vivid photo printing.
NOTE
• Printing will take longer when this setting is enabled.
• This cannot be used when <PLAIN PAPER> is selected for the paper type.
Chapter 5
SMALL
OFF
Photo Printing From A Memory Card (MP370)
43