Setting Date Printing - Canon MultiPASS MP360 User Manual

Setting Date Printing

Enabling this setting will print the date, recorded by the digital camera, below each thumbnail on
an index or on the bottom right of the photograph
To enable/disable date printing:
1. Press [PHOTO PRINT].
2. Press [Menu] once until <1.PHOTO PRINT MODE> appears.
3. Use [ ] or [ ] to select the printing method, and then press [Set].
4. Use [ ] or [ ] to select the paper size, and then press [Set].
5. Use [ ] or [ ] to select the paper type, and then press [Set].
6. Use [ ] or [ ] to enable or disable borderless printing, and then press [Set].
•
<PRINT DATE> is displayed on the LCD.
Ex:
4.PRINT DATE
NOTE
• The menu number may differ, depending on the photo print settings.
7. Use [ ] or [ ] to enable or disable date printing.
– OFF: Disables date printing.
– ON: Enables date printing.
NOTE
• Printing will take longer when this setting is enabled.
• You cannot set date printing from the machine for DPOF printing. (See page 59)
44
Photo Printing From A Memory Card (MP370)
OFF
.
Chapter 5