Canon MultiPASS F50 Setup Instructions page 8

2. With your PC on, close any open application including virus checkers.
3. Insert the MultiPASS Suite Software CD-ROM into the CD-ROM drive. The setup
program should run automatically.
NOTE: If the setup program does not run, click START, then RUN, then type
D:\csplash.exe, where D is your CD-ROM drive.
4. When the main menu appears, click Install MultiPASS Suite.
5. Read the Welcome screen, then click Next.
6. Read the License Agreement. If you agree to its terms, click YES. If you do not
agree, click NO. You will not be allowed to continue the installation process.
7. Select the MultiPASS F50 for installation.
Continue to follow the on-screen instructions.
8. When prompted, connect one end of the USB cable (not included) to the computer
and the other end to the F50 MFP, so it can be automatically detected.
Once the USB cable is connected, if a system message appears indicating the system
driver is being installed, wait until the installation process in completed then click
YES to continue.