Table of Contents
Advertisement
SECTION 3 – HANDLING, STORAGE, INSTALLATION AND REASSEMBLY
MOVING THE MACHINE ON ROLLERS
Plan the entrance for the machine by placing the ma-
chine on rollers as shown in the figure below.
Do not incline the machine more than 10°. If the ma-
chine has to be inclined more than 10°, it is necessary
to extract the solution and refrigerant beforehand.
FIGURE 4 - MOVING THE MACHINE ON ROLLERS
26
FORM 155.35-ICOM2.EN.CE/GB (1018)
Use care not to apply shock to the machine. The ma-
chine is a high-vacuum vessel containing a corrosive
solution. Use diligence in protecting it as repair is labor
intensive and costly.
When a skid base is used to move the machine on roll-
ers, secure the skid base and place the machine legs
evenly on the skid base before moving the machine on
rollers.
DATE: 10/30/2018
JOHNSON CONTROLS
Advertisement
Table of Contents
Troubleshooting
