Table of Contents
Advertisement
SECTION 1 – GENERAL CHILLER-HEATER AND SAFETY INFORMATION
QUALITY ASSURANCE
Units comply with the following directives:
• GB/T 18431-2014
For CE
• EN ISO 12100:2010
• EN 60204-1: 2006+A1: 2009
• EMC Directive 201 4/30 EC
• EN 55011: 2009+A1: 2010 (Group 1, Class A)
• EN 61000-6-2: 2005
The unit must be grounded. No installation or main-
tenance work should be attempted on the electrical
equipment without first switching the power off, then
isolating and locking-off the power supply. Servicing
and maintenance on live equipment must not be at-
tempted. No attempt should be made to gain access to
the control panel or electrical enclosures during normal
operation of the unit.
Components may also have sharp edges. Reasonable
care should be taken when working in contact with
any components to avoid risk of minor abrasions and
lacerations.
12
FORM 155.35-ICOM2.EN.CE/GB (1018)
HIGH TEMPERATURE AND PRESSURE
CLEANING
High temperature and pressure cleaning methods (for
example, steam cleaning) should not be used on any
part of the pressure system as this may cause operation
of the pressure relief devices. Detergents and solvents,
which may cause corrosion, should also be avoided.
DATE: 10/30/2018
JOHNSON CONTROLS
Advertisement
Table of Contents
Troubleshooting
