Figure 37 - Chilled / Hot Water, Cooling Water And Waste Exhaust Gas System (Example Of One Exhaust Gas Outlet Flange) - York YHAU-CE Installation Operation & Maintenance

FORM 155.35-ICOM2.EN.CE/GB (1018)
DATE: 10/30/2018
PART NAME
Solution or refrigerant pump shut
off valve
Temperature controller (TIC)
Sequencer unit
Relay
Timer
Fuse
DC power unit
Magnetic contactor, thermal relay
Battery for sequencer unit
Battery for touch panel
Touch panel
Inverter (option)
Fan for control panel
Differential pressure switch
Pressure sensor
Pressure switch
Resistance Temperature detector
Thermocouple
Temperature gauge (or sensor)
Pressure gauge
Expansion joint
Gas Engine
Radiation Heat Exchanger
(out of scope)
FIGURE 37 - CHILLED / HOT WATER, COOLING WATER AND WASTE EXHAUST GAS SYSTEM
(EXAMPLE OF ONE EXHAUST GAS OUTLET FLANGE)
JOHNSON CONTROLS
LIFESPAN AND REPLACEMENT
INTERVAL
Every 48,000 hours
Every 30,000 hours
Every 30,000 hours
Every 5 years
Every 30,000 hours
Exhaust Gas
Inlet Damper
Purge Blower
Scope of supply
Other equipment shall be
prepare by customer
SECTION 7 – MAINTENANCE
REMARKS
Exhaust Gas
By-pass Damper
Exhaust Gas Exhaust Gas
Absorption Chiller Outlet Damper
(One Exhaust Gas
Outlet Flange)
7
Chimney
Cooling
Tower
Cooling
Water
Chilled
Water
LD26803
101